Matsalar taextruded board shine gyara shi lokacin amfani.

Yawancin ma'aikatan gine-gine ya kamata su yi amfani da mai mulki na mita 2 don daidaita katakon da aka cire a lokacin aikin manne da bango, ta yadda zai yiwu a tabbatar da kwanciyar hankali na katako.A lokaci guda kuma, sassan da ke tsakanin faranti suna buƙatar fitar da su, kuma babu wani rata da zai iya bayyana, kuma turmi ba zai iya zama mai sihiri ba a cikin haɗin gwiwa.Idan ba a gama yanki ɗaya ba, ya zama dole don fitar da turmi na polymer da ya wuce kima a cikin lokaci, kuma a lokaci guda, ba za a iya barin rata tsakanin allunan extruded ba.

Idan katakon da aka cire da kansa ba a yanke shi tsaye ba, to wajibi ne a yi amfani da tsiri na katako don aiwatar da aikin smoothing.Hakanan ya kamata a liƙa allon da aka cire a kwance, ta yadda mannewar da ke gaba za ta kasance da sauƙi, kuma katakon da aka fitar da kansa yana buƙatar daidaitawa sama da ƙasa.

Bugu da kari, wata matsala ta allo da aka fitar ita ce nika.Rashin daidaituwa na haɗin gwiwa na katakon extruded kanta zai haifar da rashin daidaituwa a kan manna na gaba.A wannan lokacin, zaku iya amfani da takarda mai yashi ko guduma na lantarki don aikin niƙa.Aikin niƙa yana buƙatar zama mai laushi, kuma jagorancin niƙa shine mafi kyau don amfani da da'irar a matsayin aikin.Ba za a iya goge shi tare da diagonal shugabanci na extruded allon.Bayan goge goge, yakamata a yi amfani da goga ko matsewar iska don share tarkace.